Product tabs

• Specification

  Printing Temperature 21-25

  Hardness(Shore D)88D

  Density1.05 - 1.25 g/cm3

  Viscosity200-400 MPa?s 

  Flexural modulus708.59?10%

  Flexural strength 30.11 ?10%

  Tensile strength33.78 ?10%

  Tensile modulus520.96 ?10%

  Maximum pulling force: 1404.3 N ?10%

  Absorb wavelength: 355-410nm

  Elongation at break8.77 % ?10%

  Notched impact strength: 24.2 ?10%

• What's in the Box

  COLOUR: Skin
  MATERIAL: Standard
  SIZE: 500ml

• Tips

  Shake up the bottle before use and avoid direct sunlight and dust.
  Do not drink it and keep it out of the reach of children.
  We suggest you wear a mask and gloves to avoid direct skin contact and maintain good indoor ventilation. Use near an open window.
  If you do get the resin in contact with your skin wash off with soap and water. If you feel any discomfort please see a doctor ASAP.
  Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol or isopropyl alcohol for 30 seconds or more.