Monocure 3D CMYK pigment sets (4 x30mls) 405nm

£16.66 £19.99 (inc. VAT) £25.99

Earn 19 loyalty points, worth £0.19, with this purchase.


Cyan, Magenta, Yellow & Black Pigment Solutions. Create Custom Colours using the CMYK pigment set.

Shake well before each use. Slowly drip the pigment solution into Monocure 3D resin and mix well until desired colour is reached. To obtain the same colour density of our pigmented Rapid Resin, you will need to add approximately 4ml of the pigment dispersion. Adding too much pigment can result in slower curing times and potentially inhibit the cure completely.

The pigment solution can be added to our white resin or clear depending on the finish you are after. When adding to the white base resin an opaque finish will result. If you add to the clear resin a transparent look will result. The more pigment you add, the more solid the colour will become.

Please be extremely cautious when handling the pigments as they will stain very easily.

Pigment dispersions are safe to use, but it is always recommended to read and understand the safety and technical information before use.


Colour Mix
Material Pigment
Size 30ml
Brand Monocure 3D
product review overlay image

Customer reviews

(1 Customer reviews)
Write a review

Perfect for tinting clear resins!

Use these with a mix of Flex and Elegoo Transparent, just a few drops in the vat and away you go. Didnt need to mess with my exposures in any way, worked a treat.

Their also great for brushing/airbrushing on a print after its done for some cool effects.

Ryan M December 2020