Be the first to review this product.
Monocure 3D Platebond
Monocure 3DPLATEBOND is a UV cured build plate adhesion promoter. It is designed to help 3D printed resin parts adhere to the build plate. This can be used in conjunction with Monocure 3D resin or with other photopolymer resin systems. This product is designed to work with 3D printing applications where UV light is used to cure resin layer by layer.
Open the twist top dispenser and squeeze a small line of PLATEBOND across one end of the build plate. Use a gloved finger, paint scraper or spatula to smear the product across the entire build-plate surface. The PLATEBOND will combine with the first two base layers of resin and help the 3D model adhere to the build plate thanks to the advanced formulation. The printed part can be removed from the build plate with your normal, preferred method. This product is safe to use and highly recommended before every print. Its always important to follow the safety and technical information before use.
- Apply a few drops onto the build plate using the dripper provided.
- Using a scraper or gloved finger, smear the PLATEBOND liquid adhesive across the entire print area.
- Allow the printer to cure the PLATEBOND with the first few base layers. (It does not need to be cured before printing).
- If the model is difficult to remove after printing, hot water or a hairdryer can be used to help release the model from the build plate.