SUNLU PLA Grey Filament 1.75mm 3D Printer Filament 1kg

RRP:£28.79
0 Reviews raiting starraiting starraiting starraiting starraiting star

Be the first to review this product.

SUNLU PLA Grey Filament 1.75mm 3D Printer Filament 1kg

RRP:£28.79
  • Toughness Enhanced PLA Filaments SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimised printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
  • Dimensional Accuracy & Consistency These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
  • Clog-Free, Bubble-Free & Easy-to-use Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220, bed 70 .
  • Wide Compatibility Works and harmonises perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.

SUNLU PLA 3D Printer Filament

SUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.

It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.

FAQ

Why can't the filaments stick to the hotbed easy?

1). Check the temperature setting before printing, PLA filament temperature about 190-220;

2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;

3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

Tips:

1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.

2).Be sure to insert the free end of the PLA filament into the holes to avoid being tangled for next time use.

3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.

COLOUR: Grey
DIAMETER: 1.75mm
MATERIAL: PLA
WEIGHTKG: 1

Product tabs

    £0.00
    £19.99
    Earn 20Reward points
    Or 6 Weekly Interest Free Payments From £3.33 with
    QTY

    Do you want to be notified when this product is back in stock? Complete the form below and we'll let you know when it is.


    Recommend this product

    SUNLU PLA Grey Filament 1.75mm 3D Printer Filament 1kg


    0 Reviews raiting starraiting starraiting starraiting starraiting star

    Be the first to review this product.